Jump to content

LEO FFB


tazius
 Share

Recommended Posts

ciao raga.....

x ki usa il leo ffb e vuole provare......

ho ottimizzato i valori "meccanici" del ffb alle caratteristiche delle vetture f1 1988, vi consiglio di farvi una copia dell'originale LeoFFB.ini, inserire le stringhe modificate (magari salvarvi una copia del file modificato, in maniera da utlizzarlo unicamente quando girate con il mod di carlo...vista l'esatta rispondenza di valori).

Basta fare un copia e incolla oppure sostituire i valori differenti

9.75 Front Wheel lock angle, degrees (max deflection to one side from straight on)

0.893 Front wheel distance to centerline (half the front wheel track) in metres, from .pm file

1.47 Front axle distance to body reference point (about half the wheel base) in metres, from .pm file

2.5 Relative strength of FFB effects

6.0 Aligning moment curve shape / feeling of tyre losing grip. Lower numbers are duller, range 1.0 .. 10

0.99 Negative aligning moment parameter for high slip angles, range 0.0 ... 1.0

10.0 Slip angle where aligning moment reverses direction - typically between 8 and 15 degrees

0.0 Caster (dimetionless)

0.0 Camber ratio (not degrees!)

1.0 Road bumps feeling on the wheel

11500.0 maximum FFB force for stationary and low speed effects

10.0 stiffness of stationary wheels

1.5 wheel rubber hardness (1..5)

8.0 how quickly static forces drop off when rolling

questo discorso...per ki usa il leoffb può kiaramente essere fatto con tutti i mod cambiando i parametri...infatti lo uso anke x F1 2008 :asd:

Edited by tazius
Link to comment
Share on other sites

ciao raga.....

x ki usa il leo ffb e vuole provare......

ho ottimizzato i valori "meccanici" del ffb alle caratteristiche delle vetture f1 1988, vi consiglio di farvi una copia dell'originale LeoFFB.ini, inserire le stringhe modificate (magari salvarvi una copia del file modificato, in maniera da utlizzarlo unicamente quando girate con il mod di carlo...vista l'esatta rispondenza di valori).

Basta  fare un copia e incolla oppure sostituire i valori differenti

9.75 Front Wheel lock angle, degrees (max deflection to one side from straight on)

0.893 Front wheel distance to centerline (half the front wheel track) in metres, from .pm file

1.47 Front axle distance to body reference point (about half the wheel base) in metres, from .pm file

2.5  Relative strength of FFB effects

6.0 Aligning moment curve shape / feeling of tyre losing grip. Lower numbers are duller, range 1.0 .. 10

0.99 Negative aligning moment parameter for high slip angles, range 0.0 ... 1.0

10.0 Slip angle where aligning moment reverses direction - typically between 8 and 15 degrees

0.0 Caster (dimetionless)

0.0 Camber ratio (not degrees!)

1.0 Road bumps feeling on the wheel

11500.0 maximum FFB force for stationary and low speed effects

10.0 stiffness of stationary wheels

1.5 wheel rubber hardness (1..5)

8.0 how quickly static forces drop off when rolling

questo discorso...per ki usa il leoffb può kiaramente essere fatto con tutti i mod cambiando i parametri...infatti lo uso anke x F1 2008 :asd:

Cioè usi questi stessi valori anche per le F1?

Comunque li provo visto che sto usando il Leo da poco, mi ci sto pinpiano abituando :clap::clap:

Link to comment
Share on other sites

ecco inseriti i valori come da new mod F1 2008

15.0 Front Wheel lock angle, degrees (max deflection to one side from straight on)

0.7177 Front wheel distance to centerline (half the front wheel track) in etres, from .pm file

1.635 Front axle distance to body reference point (about half the wheel base) in metres, from .pm file

come avrai capito cambiano solo i primi 3 valori riferiti all'avantreno della monoposto....tutti gli altri li puoi modificare a tuo piacimento.....in base alle tue caratteristiche di guida, setup, e sensazioni di ffb...

ciaoooo

ah...forse nn è il posto adatto x postare i valori del 2008...visto ke siamo dentro il 1988 :asd::asd:

vedi te se fare un new topic

Edited by tazius
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...